HP ProCurve NAC 800 User Manual page 342

802.1X Quarantine Method
Setting up the 802.1X Components
11-24
d. Settings tab – Select any of the request and status options you are
interested in logging.
e. Log file tab –
In the Format area, select the IAS radio button.
i.
ii. In the Create a new log file area, select a frequency, such as Daily.
iii. Select the When disk is full, delete older log files check box.
iv. Click OK.
13. Install the NAC 800-to-IAS connector – The NAC 800 IAS Connector is a
DLL file that is installed on your Windows Server 2003 machine where the
IAS component is enabled. The connector is called by IAS after the
RADIUS authentication of an endpoint and during the authorization
phase. The connector contacts NAC 800 and asks for the posture of the
endpoint. Depending on the posture of the endpoint, the plug-in can return
RADIUS attributes to your switch instructing it into which VLAN to place
an endpoint. The following figure illustrates this process:
Figure 11-23. NAC 800-to-IAS Connector
a. Copy the following NAC 800 IAS Connector files from http://
www.procurve.com/nactools to the WINDOWS/system32 directory
on your Windows Server 2003 machine.