Setting The Access Mode; Naming Your Enforcement Cluster - HP ProCurve NAC 800 User Manual

System Administration
System Settings
15-8
For example, to change the NAC policy to not run the Windows automatic
update test:
Home window>>NAC policies
1. Select the NAC policy that tests the domain's endpoints.
Select the Tests menu option.
2.
3. Clear the Windows automatic updates check box.
Click ok.
4.

Setting the Access Mode

The access mode selection is a quick way to select enforcement (normal
mode) for all traffic into an Enforcement cluster, or open it up for trial-use
purposes (allow all).
To change the access mode:
Home window>>System monitor>>Select an Enforcement cluster
Select one of the following from the Access mode area:
1.
normal – Access is regulated by the NAC policies
•
• allow all – All requests for access are granted, but endpoints are still
tested
Click ok.
2.

Naming Your Enforcement Cluster

To name your Enforcement cluster:
Home window>>System configuration>>Enforcement clusters &
servers>>Select an Enforcement cluster
In the Cluster name text field, enter a name. Choose a name that describes
1.
the cluster, such as a geographic location (like a street or city name), a
building, or your company name.
Click ok.
2.