HP ProCurve NAC 800 User Manual page 129

b. Enter the Password used to log into this device's console.
c. To help confirm accuracy, type the same password you entered into
the Password field in the Re-enter Password field.
d. Enter the Enable mode user name that is used to enter enable mode on
this device.
Enter the Password used to enter enable mode on this device.
e.
f. To help confirm accuracy, type the same password you entered into
the Enable password field in the Re-enter Password field.
g. Enter the amount of time, in milliseconds, before an idle open SSH
session is reset. The default is 60000 (60 seconds) in the Reconnect
idle time field.
8. Telnet settings:
a. Enter the User name used to log into this device's console.
b. Enter the Password used to log into this device's console.
c. To help confirm accuracy, type the same password you entered into
the Password field in the Re-enter Password field.
d. Enter the Enable mode user name that is used to enter enable mode on
this device.
Enter the Password used to enter enable mode on this device.
e.
f. To help confirm accuracy, type the same password you entered into
the Enable password field in the Re-enter Password field.
g. Enter the amount of time, in milliseconds, before an idle open Telnet
session is reset. The default is 60000 (60 seconds) in the Reconnect
idle time field.
9. SNMPv2 settings:
a. Enter the Community string used to authorize writes to SNMP objects.
b. Enter the OID used to re-authenticate an endpoint in the Re-
authenticate OID text field. The strings "${Port}" and "${MAC}" will be
substituted for the port and MAC address of the endpoint to be re-
authenticated.
Select the type of the re-authentication OID from the OID type drop-
c.
down list:
– INTEGER
– unsigned INTEGER
– TIMETICKS
– IPADDRESS
– OBJID
– STRING
– HEX STRING
System Configuration
Quarantining, 802.1X
3-81