Managing Passwords - HP ProCurve NAC 800 User Manual

NAC 800
password
NAC 800
Management or
Enforcement
server
NAC 800 database Initial install process *
NAC 800 user
interface,
administrator
account
endpoint / domain
administrator
Windows domain
OpenLDAP
Table 15-4. NAC 800 Passwords

Managing Passwords

The passwords associated with your NAC 800 installation are listed in the
following table:
Set during
Initial install process *
Initial install process *
Manually entered on the endpoint by the
end-user.
If the end-user has not defined a login/
password combination, the default login is
usually "administrator" with a blank
password.
Known passwords are entered on the
System
configuration>>Windows>>Agentless
credentials window to allow NAC 800 to test
the endpoint.
Manually entered after installation on the
System
configuration>>Quarantining>>802.1X
Quarantine method radio button window.
Manually entered after installation on the
System
configuration>>Quarantining>>802.1X
Quarantine method radio button window.
System Administration

Managing Passwords

Recovery process
See "Resetting the NAC 800 Server
Password" on page 15-22.
See "Resetting the NAC 800 Database
Password" on page 15-23.
• For known passwords – NAC 800 Home
window >> System configuration >> User
accounts
• For unknown passwords – See
"Changing the NAC 800 Administrator
Password" on page 15-23.
Password recovery on endpoints is beyond
the scope of this document.
Windows domain password recovery is
beyond the scope of this document.
OpenLDAP password recovery is beyond
the scope of this document.
15-21