HP ProCurve NAC 800 User Manual page 343

NOTE:
support/ias/SAIASConnector.dll
support/ias/SAIASConnector.ini
SAIASConnector.ini is installed within NAC 800 using standard system
defaults. Utilities for this such as DebugAttributes and DebugLevel should be
modified only in conjunction with technical assistance through ProCurve
ProCurve Networking by HP at or .
b. Import the NAC 800 server's certificate so the connector can
communicate with NAC 800 over SSL:
i. On the Windows Server 2003 machine, click Start.
ii. Select run.
iii. Enter mmc.
iv. Click OK.
Figure 11-24. IAS, Add/Remove Snap-in
v. Select File>>Add/Remove Snap-in.
802.1X Quarantine Method
Setting up the 802.1X Components
11-25