Acting On Selected Endpoints; Manually Retest An Endpoint; Immediately Grant Access To An Endpoint - HP ProCurve NAC 800 User Manual

Acting on Selected Endpoints

Once you have filtered the Endpoint activity window and selected which
endpoints to take action on, you can perform the following actions:
■ Retest an endpoint ("Manually Retest an Endpoint" on page 4-19)
■ Allow temporary access for a specific period of time ("Immediately
Grant Access to an Endpoint" on page 4-19)
Temporarily quarantine the endpoint for a specific period of time
■
("Immediately Quarantine an Endpoint" on page 4-20)
■ Clear the temporary quarantine or access state ("Clearing Temporary
Endpoint States" on page 4-20)

Manually Retest an Endpoint

To manually retest an endpoint:
Home window>>Endpoint activity
1. Select a box or boxes to select the endpoints of interest.
Click retest.
2.

Immediately Grant Access to an Endpoint

To immediately grant access to an endpoint:
Home window>>Endpoint activity
1. Select a box or boxes to select the endpoints of interest.
2. Click change access.
Select the Temporarily grant access for radio button.
3.
4. Select minutes, hours, or days from the drop-down list.
5. Enter the number of minutes, hours, or days that the endpoint is allowed
access.
Click ok.
6.
TIP:
To quarantine again, select the endpoint, click change access, select Clear
temporary access control status, and click ok.
Endpoint Activity

Acting on Selected Endpoints

4-19