Windows 2000 Professional Setup - HP ProCurve NAC 800 User Manual

a. Select Wireless Zero Configuration. If the Status column does not
already show Started, start the service:
Right click on Wireless Zero Configuration.
i.
ii. Select Start.
b. Close the Services window.
2. Configure the network connections:
Windows desktop>>Start>>Settings>>Control Panel>>Network Connections
Right-click on Local Area Connection. Select Properties. The Local Area
3.
Connection windows appears (Figure 11-32 on page 11-41).
Select the General tab.
4.
5. Select the Show icon in notification area when connected check box. This
enables the Windows XP balloon help utility, which can assist you when
entering information and troubleshooting errors.
Select the Authentication tab (Figure 11-33 on page 11-42).
6.
a. Select the Enable IEE 802.1X authentication for this network check box.
b. Select an EAP type from the drop-down list. For this example, select
MD5-Challenge.
Important: This EAP type must match the EAP type selected in
"Setting up the RADIUS Server", step 7, step q on page 11-17.
Clear or select the Authenticate as computer when computer information
c.
is available check box. The choice is yours.
Click OK.
7.
8. Select to reboot if prompted.

Windows 2000 Professional Setup

To enable a Windows 2000 Professional endpoint for 802.1X:
1. Start the wireless service:
Windows desktop>>Start>>Settings>>Control Panel>>Administrative
Tools>>Services
a. Select Wireless Configuration. If the Status column does not already
show Started, start the service:
Right click on Wireless Configuration.
i.
ii. Select Start.
802.1X Quarantine Method
Setting up the 802.1X Components
11-43