Specifying The End-User Test Failed Pop-Up Window - HP ProCurve NAC 800 User Manual

a. Introduction (opening screen) – Enter the introduction text for the
default window. ProCurve recommends you provide text here that
sets the stage for the end-user's experience.
b. Test successful message (final screen) – Enter the text for the final, test
successful window. ProCurve recommends that this text informs the
end-user that the test was successful and provides any additional
helpful information such as instructions, notices, and so on.
c. Footer (most screens) – Enter the text for the footer that appears on
most of the end-user windows. ProCurve recommends that this text
includes a way to contact you if they need further assistance. You can
format the text in this field with HTML characters.
Click ok.
2.

Specifying the End-user Test Failed Pop-up Window

To specify the end-user test failed pop-up window:
Home window>>System configuration>>End-user screens
Select the Pop up an end-user notification when an endpoint fails one or
1.
more tests check box to turn the pop-up window on (clear the check box
to turn it off).
2. Enter the customization information:
Notification pop-up URL – In the Notification pop-up URL text box, the
a.
default is:
https://ServerIpaddress:89
This URL points to port 89 on the NAC 800 ES (the default end-user
screen that shows the test failed results), and is where the user is
directed to when they click the Get details button on the new pop-up
window.
TIP:
Enter a different URL if you have a custom window you want the users to see.
For example, you might have a location that provides links to patch or
upgrade their software.
b. Test failed pop-up message – In the Test failed pop-up message text box,
enter the message the end-user views on the standard pop-up window.
System Configuration
Cluster Setting Defaults
3-121