System Configuration
Quarantining, 802.1X
NOTE:
3-64
•
Enterasys – See "Enterasys" on page 3-71.
Extreme ExtremeWare – See "Extreme ExtremeWare" on page 3-73.
•
Extreme XOS – See "Extreme XOS" on page 3-75.
•
•
Foundry – See "Foundry" on page 3-77.
HP ProCurve switch – See "HP ProCurve Switch" on page 3-79.
•
HP ProCurve WESM – See "HP ProCurve WESM xl or HP ProCurve
•
WESM zl" on page 3-82.
•
HP ProCurve 420/530 AP – See "HP ProCurve 420 AP or HP ProCurve
530 AP" on page 3-85.
Nortel – See "Nortel" on page 3-87.
•
Other – See "Other" on page 3-89.
•
Click ok.
7.
Testing the Connection to a Device
The test connection area has different options based on the switch you select:
Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches – See
■
figure 3-28.
■
ProCurve, Nortel, Other switches – See figure 3-29.
To test the connection to an 802.1X device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine
method radio button
You must have already added devices for them to appear in the 802.1X devices
area. You can also test the device as you add it.