HP ProCurve NAC 800 User Manual page 153

Logo file – approximately 154 pixels wide x 24 pixels high
Icon file – approximately 18 x 18 pixels
2. Copy the logo and icon files to the following directory on the NAC 800 MS
(see "Copying Files" on page 1-20):
/usr/local/nac/webapps/ROOT/images
3. Log in to the NAC 800 MS as root using SSH or directly with a keyboard.
4. Modify the following properties in the nac-ms.properties file
(see "Changing Properties" on page 15-12):
Compliance.PostConnect.Agents.<PRODUCTID>.Logo=<Logo
filename>
Compliance.PostConnect.Agents.<PRODUCTID>.Icon=<Icon
filename>
Compliance.PostConnect.Agents.<PRODUCTID>.Name=<Frie
ndly Product Name>
Where:
<PRODUCTID> is the identifier for the post-connect service.
For example, PostConnectServiceName
<Logo filename> is the name of the logo file.
For example, logo_post_connect.gif
<Icon filename> is the name of the icon file.
For example, icon_quarantined_post_connect.png
<Friendly Product Name> is a user-friendly name for the post-connect
service.
For example, MyCompany PostConnectServiceName
5. Modify the <PRODUCTID> in the connector.properties file (see
"Changing Properties" on page 15-12):
product=PostConnectServiceName
System Configuration
Post-connect
3-105