Table of Contents
Advertisement
Setting Memory Shadow
Setting Boot Options
The default setting enables memory shadow. This can increase your
workstation's performance. This applies only if your workstation has
a plug-in video board. If you want to disable the memory shadowing,
perform the following steps:
1. Move the cursor to the Memory Shadow field on the Main Menu
and press Enter. The Memory Shadow Menu appears.
2. Select Disabled in the Video Shadow field to disable the video
shadow.
3. Move the cursor to the Exit Menu, select Exit Saving Changes or
Save Changes, and press Enter.
To set boot options, perform the following steps:
1. Move the cursor to the Boot selection and press Enter. The Boot
Options Menu appears.
2. Select the sequence of drives that the workstation will access when
booting the system.
3. Move the cursor to the Exit Menu, select Exit Saving Changes and
press Enter.
Chapter 4: Setup
4-7
Advertisement
Table of Contents
