Settings; Setting The Print Head Gap - Dascom T2150 User Manual

Settings

7
Settings
Setting the print head
gap
Adjust Paperway
Menu Char
1 2 3 4
TOF
Head Tear
1 2 3 4
Head= 0 *
Set < > Exit
1 2 3 4
38
This section describes how to set the print head gap, the tear posi-
tion and the first printing line.
The printer features automatic print head gap adjustment to the
thickness of the paper used. In setup mode, you can enter a correc-
tion value to modify the head gap determined automatically. This
correction is useful for modifying the appearance of the type face.
The AGA (automatic gap adjustment) function must be set to
On. For more detailed information, refer to the section
tic gap adjustment (AGA) (page
Press the Setup key. The printer changes to setup mode.
Press the Adjust (2) key.
Online
Setup
Press the Head (1) key.
Online
Setup
Use the < (2) or > (3) key to set the range within which the automatic
gap adjustment is to be corrected. You can select values in the ran-
Online
ge from -10 to +10.
Confirm the input by pressing the Set (1) key.
Setup
Press the Setup key. The printer returns to the initial status.
Negative values decrease the print head gap, positive values
increase it. Changing the automatically determined value may
have a strong effect on the printing quality.
The setting made will be retained after switching off the
printer.
85).
User guide
Automa-