Moving The Paper To The Tear Position; Removing Paper - Dascom T2150 User Manual

User guide
Moving the paper to the
tear position
Online Tractor1
Tear
1 2 3 4
Tear position
Tractor1
3
1 2 4
Online Tear
Exit
1 2 3 4

Removing paper

Offline Tractor1
Park Load
1 2 3 4
You can use the Tear key to move the paper to the tear position.
The tear edge is located at the front side of the paper output opening
(see Printer at a glance
Online
Make sure that the printer is in online mode. If necessary, press the
Online key.
Setup
Press the Tear (4) key. The printer moves the perforation edge of
the fanfold paper to the tear edge.
The display alternates between...
Online
Setup
and...
After having torn off the paper, press the Exit key. The printer re-
turns the paper to the printing position.
Online
If a print job is active, the printer returns the paper automatically to
the printing position.
Setup
Make sure you tear the paper off straight, otherwise a paper
jam may occur.
Never use force to remove the paper from the printer. Other-
STOP
wise the mechanical components may be damaged.
Make sure that the printer is in offline mode; press the Online key,
if necessary.
Online
Press the Park (1) key. If fanfold paper is loaded in the printer, it is
fed to the tear position. The text Tear paper off appears in the dis-
Setup
play.
Now remove the paper from the tractor. Then press any key. If a sin-
gle sheet is loaded in the printer, it is ejected.
(page 2).
Paper handling
37