Online Mode; Offline Mode - Dascom T2150 User Manual

The control panel

Online mode

Online Tractor1
Tear
1 2 3 4

Offline mode

Offline Tractor1
Park Load Load
1 2 3 4
12
After switching on, the printer is automatically set to online mode.
Only in this mode can it receive data from the computer.
Tear key (4): Activates the tear function when fanfold paper is
loaded, see (see
Online
If Load is displayed above this key, no paper is loaded in the prin-
ter or the printer is in park position. In this case the display swit-
Setup
ches between Online and Park Position. Press the key to feed
paper to the printing position.
Setup key: Sets the printer to setup mode.
Online key: Sets the printer to offline mode.
Only in this mode is it possible to perform step, line, or form feeds
from the control panel, see (see
ver, data cannot be received.
Park key (1): Clears the paper path with paper loaded and acti-
vates paper path quick selection, see (see
Online
type, page 27).
Setup
Key
Continuous paper feed.
Key
Continuous paper reverse feed up to the park position.
Load key (4): If no paper is loaded, see above.
If paper is loaded: Loads paper from the selected paper source;
the display changes to LF/FF
Short keypress: Line Feed (LF).
Long keypress: Form Feed (FF).
Setup key: Sets the printer to setup mode.
Online key: Sets the printer to online mode.
Moving the paper to the tear
(2): Short keypress: Microstep forward. Long keypress:
(3): Short keypress: Microstep reverse. Long keypress:
position, page 37).
Paper transport, page 36); howe-
Changing the paper
User guide