Handling And Settings; Changing The Paper Type - Dascom Tally T2150S Quick Start Manual

Handling and settings

Handling and settings

Changing the paper type

Offline Single
Park Load
1 2 3 4
Single Tractor1
ASF-R Next
1 2 3 4
Load paper from
Tractor1
1 2 3 4
Offline
Park Load
3
1 2 4
8
The printer is able to process either single sheets or fanfold paper. Only fanfold
paper can be cutted. If the printer is set for single-sheet mode, you will need to
change the paper type.
This example shows how to select tractor 1 (the recommended paper source). You
can select tractor 2 or tractor 3 in the same way. We recommend to use only one
tractor since the cutting position may change when the paper source is changed.
Ensure that the printer is in Offline status; press the Online key, if necessary.
Press the Park key.
Online
If a single sheet is loaded in the printer, it will be ejected.
Setup
Press the Tractor1 key.
If you do not make a selection within 5 seconds, the printer exits the menu without
Online
a change.
Setup
The printer changes back to Offline status and the display alternates between...
Online
Setup
and...
Press the Online key.
Online
Setup
Quick start guide