Selecting Emulation (Emulate); Bidirectional Printing (Bidir) - Dascom T2150 User Manual

The Menu
Selecting emulation
(Emulate)
ESCChar Emulate
Back Next
1 2 3 4
Epson LQ-2550 *
Set < > Exit
1 2 3 4
Bidirectional printing
(Bidir)
Bidir I/O
Back Next
1 2 3 4
Bidir=On *
Set < > Exit
1 2 3 4
52
Selects the emulation. When a printer understands the control set
written for another printer type, it is said to emulate the other printer.
MTPL is also active in IBM or Epson emulation mode.
Press Emulate (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Epson LQ-2550, Epson LQ-2170,
Online
Setup
Default Setting: Epson LQ-2550
If the printer is switched to online mode after changing the emula-
tion, it performs a reset.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Setting On: Printer prints in both directions (bidirectional).
Setting Off: Printer prints only in one direction (from left to right).
Press Bidir (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: On/Off
Online
Default Setting: On
Setup
Confirm the setting by pressing the Set key (1).
The setting On will not be overwritten by ESC sequences.
IBM Propr. XL24, IBM ProXL24+AGM,
MTPL
User guide