Paper Parameters (Paper); Form Length (Forml) - Dascom T2150 User Manual

User guide

Paper parameters (Paper)

Paper AutoTear
Back Next
1 2 3 4
Single Trac1
Back Next
1 2 3 4

Form length (Forml)

Forml FormAdj
Back Next
1 2 3 4
Lines Standard
Back Next
1 2 3 4
Selects the paper parameters Formlen (form length), FormAdj (first
printing position) and Head (printhead gap, only if AGA=Off) sepa-
rately for each paper source in the current menu.
Non-installed and with the parameter PapOpt activated options can-
not be selected.
Press Paper (2) key.
Online
Setup
You can now choose between the following paper options:
Single
Online
Tractor 1
Setup
ASF-F (Single sheet feeder front, option)
ASF-R (Single sheet feeder rear, option)
Tractor 2 (front, option)
Tractor 3 (rear, option)
Select the desired paperway, in our example Single (2). Press Next
(4) key, to proceed to the installed optional paperways.
You can define the form length in one of two ways: via the number
of lines or via standard formats (e.g. DIN A4).
Press Forml (2) key.
Online
Setup
If you wish to define the form length via a line format, press Line (2)
key.
Online
Setup
The Menu
63