Dascom T2150 User Manual page 26

Changing the ribbon cassette
18
Slightly tilt the ribbon cassette forwards in such a
way that it is parallel to the housing top and thread
in the ribbon in front of the print head. Locate the
two projections in the left and right guide rails of
the printer and gently press down on both sides
until it clicks into place. In this way, the cartridge is
automatically positioned correctly.
Use the knob on the right side of the cassette to
take up slack of the ribbon again. Thereby the rib-
bon will slide over the plastic noses on the left and
right of the print head into the correct positon.
Press the printer bar cover down until it clicks into
place, remount the top cover, making sure that the
projections on the cover are inserted correctly into
the recesses of the printer housing, and close it.
User guide