Printhead Gap Manually (Head) - Dascom T2150 User Manual

The Menu

Printhead gap manually (Head)

Head
Back Next
1 2 3 4
Head= 18 *
Set < > Exit
1 2 3 4
66
This parameter is ignored if the automatic gap adjustment (AGA) is
activated; see
Adjusts the printhead gap manually; separately adjustable for each
paper path.
Press Head (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0 to 100
Online
Default Setting: 18
Setup
Select the Head = 18 parameter for normal paper. Use a greater dis-
tance for thicker paper.
Recommended values for the print head gap:
thin
18
If you change this value, this may affect the print quality.
If the printout shows signs of smudging, we recommend that
you increase the print head gap.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Automatic gap adjustment (AGA) (page
26 34 42
User guide
85).
thick
50 58