Settings For Interfaces (I/O); Serial Interface (Serial); Data Transmssion Rate (Baud) - Dascom T2150 User Manual

User guide

Settings for interfaces (I/O)

Bidir I/O
Back Next
1 2 3 4

Serial interface (Serial)

Serial Interf.
Back Next
1 2 3 4

Data transmssion rate (Baud)

Baud Format
Back Next
1 2 3 4
Baud= 9600 *
Set < > Exit
1 2 3 4
In this parameter group, you can choose various settings for the
printer interfaces. See also
Press I/O (3) key.
Online
Setup
This parameter group only is valid, if an optional serial interface
module is installed.
To ensure the proper functioning of serial data trans-
STOP
fers, the serial settings of the printer and computer
(host) must coincide.
Press Serial (2) key.
Online
Setup
Selects the data transmission rate (baud rate) (baud = bit per sec-
ond).
Press Baud (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 600, 1200, 2400, 4800, 9600, 19200
Online
Default Setting: 9600
Setup
Printer and computer must have the same baud rate.
Confirm the setting by pressing the Set key (1).
Interfaces (page 143).
The Menu
53