Selecting Interface (Interf.); Interface Buffer (Buffer) - Dascom T2150 User Manual

The Menu

Selecting interface (Interf.)

Serial Interf.
Back Next
1 2 3 4
Interf.= Share*
Set < > Exit
1 2 3 4

Interface buffer (Buffer)

Buffer
Back Next
1 2 3 4
Buffer=128 KB *
Set < > Exit
1 2 3 4
58
Selects the interface. Printer is configured either for parallel, Ether-
net or optional serial connection or in automatic change for the par-
allel or the optional serial interface (Shared).
Press Interf. (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Share, Parallel, Serial
Online
Default Setting: Share
Setup
Interf.=Share: Printer switches automatically between parallel and
optional serial interface.
Interf.=Parallel: Printer using parallel interface.
Interf.=Serial: Printer using serial interface.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Selects the size of the interface buffer.
Press Buffer (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0 – 128 KB
Online
Default Setting: 128 KB
Setup
If buffer = 0 KB and the serial interface is selected, or if
the setting "Share" is active, the actual buffer size will
be 512 bytes.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to leave the parameter group Interf.. Press the Next key (4)
again to access the next group of parameters.
User guide