Paper Handling; Changing The Paper Type - Dascom T2150 User Manual

User guide
6

Paper handling

Changing the paper
type
Offline Tractor1
Park Load
1 2 3 4
Single Tractor1 Single Tractor1
ASF-R ASF-R Next Next
1 1 2 2 3 3 4 4
Load paper from
Single
1 2 3 4
Online Single
Load
1 2 3 4
This section describes how to set the paper type, load fanfold paper
and single sheets, transport paper and move the paper to the tear
position.
You can change the paper type either from an application program,
by means of the paper path quick selection feature or in the Setup
menu. In this section, the quick selection feature is described; for de-
tailed information on how to make this setting via the Setup menu,
refer to the section
Make sure that the printer is in offline mode; press the Online key,
if necessary.
Online
Press the Park (1) key. If fanfold paper is loaded in the printer, it is
fed to the tear position. The text Tear paper off appears in the dis-
Setup
play.
After having torn off the paper, press any key. If a single sheet is
loaded in the printer, it is ejected.
Use one of the marked keys to select the desired paper path, for ex-
ample, Single (2).
Online Online
The display shown here may vary depending on which
paper options you have installed.
Setup Setup
If you do not make a selection within 5 seconds, the
menu is closed.
The printer returns to offline mode. The display alternates between
the basic menu and the menu in the following figure:
Insert a single sheet (for the procedure, see
(page 30).
Online
Setup
Press the Online key to set the printer to ready status. When the
printer receives data from the computer, the single sheet is automa-
Online
tically loaded. Press the Load (4) key to load the single sheet before
starting the printout.
Setup
The Menu (page 41).
Paper handling
Loading paper
27