Line Length (Width); Barcode (Barcode) - Dascom T2150 User Manual

The Menu

Line length (Width)

Width
Back Next
1 2 3 4
Width=13.6Inch *
Set < > Exit
1 2 3 4

Barcode (Barcode)

Barcode Barmode
Back Next
1 2 3 4
Barcode=Off *
Set < > Exit
3
1 2 4
68
Selects the line length in inches. With the setting of 8 Inch, the print-
er operates like a printer with a width of only 8 inches.
Press Width (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 8 Inch, 13.2 Inch, 13.6 Inch
Online
Default Setting: 8 Inch (narrow printer)
Setup
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
With this function selected it is posible to print different barcodes and
LCP (Large Character Printing).
Press Barcode (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: On/Off
Online
Default Setting: Off
Setup
The definition and activation is performed by special sequences
through the interface. Since this selection is possible for all emula-
tions it must be noted that conflicts in sequence conformity with the
selected emulation may occur. For this reason the barcode function
can also be switched on and off by MTPL sequences. (The possible
barcodes, LCP characters and the operation of these functions are
described in the
Confirm the setting by pressing the Set key (1).
13.6 Inch (wide printer)
Barcode Programmer's Application
User guide
Manual).