Form Length (Forml) - Dascom T2150 User Manual

Advanced menu
Testmode
Initializing ...
1 2 3 4

Form length (Forml)

Formlen AGA
Back Next
1 2 3 4
Formlen=12" *
Set < > Exit
1 2 3 4
84
Enter Extended menu mode by pressing the key Online while
switching on the printer.
The display shows Test mode for approx. 1 second and then auto-
matically changes to display ASCII 80 ASCII 136 (only wide printer).
Online
Setup
The Formlen function allows you to set the basic form length to
meet your requirements. 11 inches are usual in the USA, as op-
posed to 12 inches in Europe.
Select the Forml menu (2).
Online
Setup
Setting options: 12 oder 11 Inch
Default setting:
Online
The value defined here is set in all five menus and for all paper
Setup
paths. The setting made here is not changed by loading the default
(factory) settings by pressing all four function keys; see section
functions when turning on the printer
Confirm the setting by pressing the Set (1) key.
12 inches for 220–240 V printers
11 inches for 120 V printers
(page 15).
User guide
Key