Error Messages Via The Display - Dascom T2150 User Manual

Troubleshooting

Error messages via the display

Message
Eject Error
Load Error
Load paper from
...
alternating with
Printing
100
Possible cause
The printer cannot eject the paper
or cannot place the paper in the
park position.
The printer cannot feed in the
loaded paper.
The paper has run out during ope-
ration.
1 Printer is switched on but no pa-
per is loaded in the displayed
(active) paper compartment.
2 The paper is not fed past the li-
ght barrier.
Corrective action
Check the following:
Whether the paper path is blok-
ked by a foreign object.
Whether the paper is damaged.
Whether the upper friction is
down and clicked into place.
Whether the printhead gap is
too small; see section
the print head gap, (page 38).
Check the following:
Whether the paper path is blok-
ked by a foreign object.
Whether the paper is damaged.
Whether the tractors are closed
and locked.
Whether the paper is too tight or
loose.
Whether the paper is within the
specified range.
Details see section Loading
(page 30)
Insert paper in the active sheet
feeder.
Place the paper more to the left.
If the display shows Online or Off-
line instead of Print, the printer
has loaded no paper and there is
no print job. It is no error message
in this case, actions are not requi-
red.
User guide
Setting
paper,