Setting And Activating Options (Papopt); Activation Of Tractors (Autotra) - Dascom T2150 User Manual

User guide
Setting and activating
options (PapOpt)
FFmode PapOpt
Back Next
1 2 3 4

Activation of tractors (AutoTra)

AutoTra AutoASF
Back Next
1 2 3 4
AutoTra=Off *
Set < > Exit
1 2 3 4
For setting the optional automatic sheet feeders (ASFs) and optional
tractors; see
ASFs and/or optional tractors.
Press PapOpt (3) key.
Online
Setup
This parameter only appears if at least one optional tractor is in-
stalled. It regulates the activation of tractors when there is no more
paper left in one of them.
Press AutoTra (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Off/T1=T2
Online
Default Setting: Off
Setup
If an optional tractor is not installed, Off is displayed (factory de-
fault). If an optional tractor is installed and the Off parameter is acti-
vated, only the selected tractor is supported (either via the menu or
an ESC sequence). If the selected tractor is out of paper, printing
stops.
If an optional tractor is installed and you select T1=T2, the printer will
load paper from the other tractor if the selected one is empty.
Confirm the setting by pressing the Set key (1).
Paperway (page 4). Also regulates the activation of
The Menu
71