Installation; Unpacking The Printer - Dascom T2150 User Manual

User guide
2

Installation

Unpacking the printer

➂
➁
Place your printer on a solid surface (see
your printer, page 6).
Make sure that the "Up" symbols point in the cor-
rect direction.
Open the packaging, take out the accessory cas-
sette and unpack it. Pull the printer out of the card-
board box towards you and remove the remaining
➃
packaging material.
Check the printer for any visible transport damage
and completeness. Apart from this CD-ROM (
the Quick start guide (
the ribbon (
included.
If you find any transport damage or if any accesso-
ries are missing, please contact your dealer.
➀
➄
), the power cable (
) and the paper support (
Installation
Placing
)
),
) must be
5