Printer Installation; Battery Installation - Dascom DP-330L Operator's Manual

B. Printer Installation
You could put the printer on desktop, carry with your hand or carry it with the should strap (option)
1) Desktop Installation
The printer must be installed horizontally. Place the printer on a solid, flat, stable surface; ensure the
printer is placed in a stable position and there is easy access for users to the control panel and roll
paper holder. Also ensure there is enough space for sufficient ventilation and for the printout.
2) Hans Strap Installation
The hand strap provides the user with a convenient and secure method of carrying the printer. To
attach the hand strap to the printer:
•Insert the end of the strap through the cut out on the front of the printer.
•Loop the end of the strap back around the cut out and secure it over.
•Repeat this process for the opposite end of the strap.
3) Shoulder Strap Installation
If your printer is equipped with the shoulder strap option. Insert each end of the shoulder strap into the
cut-outs in each top corner of the printer and secure the looped end over the button on the end of the
strap to fasten.
Hold the buckle and pull the strap as shown below until you achieve the desired length.
C. Battery Installation
5
www.dascom.com