Table of Contents
Advertisement
MH-5000 User Manual
Source IP
Only allow MAC
Step 10. View the results
Through the previous step, you can see the
configured result as the right diagram.
Step 11. Add a another new IP/MAC rule
Add another IP/MAC rule to allow an IP address
range to pass through MH-5000. This rule type is
useful for local PC using DHCP feature specially.
Suppose DHCP IP range of LAN1 interface is
192.168.40.100 to 192.168.40.119.
Check Activate this rule checkbox. Enter
Rule name as LAN1_DHCP. Select Allow Range
in the Rule Type field, and enter the Start IP as
and
192.168.40.100
192.168.40.119. Click Apply to store this
setting.
Rule Type
Condition
Source IP
End IP
The Source IP address which will bound the below
MAC address
The MAC address which is bound the above IP
address.
Table 11-3 Add an IP/MAC Binding rule
Advanced Setting > IP/MAC binding > Edit Rules
Advanced Setting > IP/MAC binding > Edit Rules > Insert
as
End
IP
FIELD
Refer to Table 11-3 for this field description.
The starting IP address of "IP allowed range".
The final IP address of "IP allowed range".
Table 11-4 Add an IP/MAC allow range rule
DESCRIPTION
91
IP/MAC Binding
IPv4 format
192.168.40.5
12 hex
characters (valid
0002B3CA5E2C
MAC format)
Range / Format
Binding/Allow
Range
IPv4 format
192.168.40.100
IPv4 format
192.168.40.119
Chapter 11
EXAMPLE
Allow Range
Advertisement
Table of Contents
