Table of Contents
Advertisement
MH-5000 User Manual
Step 5.
Setup WAN1-to-LAN1 Rules
Select WAN1 to LAN1 to display the rules. There
is a pre-defined rule that matches all traffic into
the default class. Click Insert to insert a rule
before the default rule.
Step 6.
Customize the Rule
Enter a rule name such as web-from-WAN,
select Source IP as WAN1_ALL and Dest. IP
as LAN1_ALL. Besides, make sure the Service is
HTTP port 80 because of that this is web service.
Select the action to be web-from-WAN. In this
way. All inbound web traffic from WAN1 will be
put
into
the
web-from-WAN
scheduled out at 300kbps bandwidth. Click
Apply to store the changes.
Repeat
the
same
video-from-WAN class.
Forward / Block
the matched
session
Don't log / Log the
matched session
Forward
Action
bandwidth class
Reverse
bandwidth class
ü Note
For the other field description above, please refer 錯誤! 找不到參照來源。 for details.
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
queue
and
procedure
for
the
If packet is matched the rule condition,
Forward or Block this matched packet?
If packet is matched the rule condition,
Log or Don't log this matched packet?
Forward the bandwidth class if any.
Reverse the bandwidth class if any.
Table 22-6 Add a new Bandwidth Management rule
Forward / Block
log / don't log
def_class
E-Commerce
LAN_1-to-LAN_2
def_class
web-from-DMZ
video-from-WAN
web-from-WAN
163
Chapter 22
Bandwidth Management
Forward
do not log
def_class
web-from-WAN
Advertisement
Table of Contents
