Planet MH-5000 User Manual page 92

MH-5000 User Manual
Leave IP/MAC binding "Allow"
Step 8.
state
Select LAN1 as the interface to edit the IP/MAC
binding rules. Because we do not add current
MAC address of our PC, do not change the
Default IP/MAC settings to Block. Please keep
this state with Allow at this moment. And click
Insert to add a rule.
Note that you have to add an IP/MAC binding rule
as Allow for your computer to pass the firewall
rule before you block the LAN1-ANY direction,
otherwise you will be blocked by that rule.
FIELD
Edit __ IP/MAC binding
rules
Step 9. Add a new IP/MAC binding rule
Add an IP/MAC binding rule to allow our PC
passing through the MH-5000. Otherwise our PC
will be blocked by MH-5000 in the further steps.
Here the IP address "192.168.40.5" is the MAC
address of our login PC.
FIELD
Activate this rule
Rule name
Rule Type
Table 11-1 Enable IP/MAC Binding feature
Advanced Settings > IP/MAC Binding > Edit Rules
DESCRIPTION
Select the local interface which you are going to
configure.
Table 11-2 Select the IP/MAC Binding configured interface
Advanced Setting > IP/MAC binding > Edit Rules > Insert
DESCRIPTION
Activate the IP/MAC binding rule.
The name of the IP/MAC binding rule.
Note that rule name should begin with alphabet,
followed by alphabet/digits/dashes.
The type of IP/MAC "Binding" is combined IP address
with MAC address together to decide packet is passed
or blocked by the MH-5000.
Another type of IP/MAC "Allow range" depends on the
IP range to permit whether packets can pass or not. For
this type, please refer Table 11-4 description.
90
IP/MAC Binding
Range / Format EXAMPLE
LAN interfaces
Range / Format EXAMPLE
Enabled/Disable
d
text string
Binding/Allow
Range
Chapter 11
LAN1
Enabled
MyPC
Binding