Planet MH-5000 User Manual page 78

MH-5000 User Manual
FIELD
Define Objects on __
Step 11. Insert a new Address object
Enter the Address name. Select which address
type the address object will be. And then enter the
IP address.
FIELD
Address name
Address Type
Step 12. View the Address object
settings
After entering the new
subsequently we add the other two address
objects. The result is shown in the "Object" page.
Note: It is the same way to setup address objects
in the other interfaces.
DESCRIPTION
Select the interface which you are going to define
address object.
Table 9-1 Define the address objects
BASIC SETUP > Books > Address > Object > Insert
DESCRIPTION
The name of the address object.
Note that address name should be an alphanumeric
value (including dash '-' and underscore '_'), can start
with a letter only and, please note, it is case-sensitive!
Spaces and other special characters are not allowed.
The address type of the object.
Table 9-2 The field of the Address object
BASIC SETUP > Books > Address > Objects
Address object,
76
IP/Services grouping
Range / Format EXAMPLE
All the interfaces
Range / Format EXAMPLE
text string
Subnet / Range
/ Host
192.168.40.1
Chapter 9
LAN1
PC1_1
Host