Planet MH-5000 User Manual page 67

MH-5000 User Manual
Dest Port
Passive FTP
client
Redirect to
internal server
under
Internal IP
Action
Port
Step 9. View the Result
Now any request towards the MH-5000's WAN1
IP (61.2.1.1) with port 44444 will be translated
into a request towards 10.1.1.5 with port 21,
and then be forwarded to the 10.1.1.5. The
FTP server listening at port 21 in 10.1.1.5 will
pick up the request.
After adding a virtual server's rule, make sure to
add a NAT and Firewall rule.
The TCP/UDP port number which is provided
by the real server.
If the Passive FTP client is checked, it will
connect to the internal DMZ FTP server of
MH-5000 when FTP client uses passive
mode. Otherwise, it will not work.
The subnet which is located the virtual server.
The IP address which is actually transferred
to the internal DMZ
The port number which is actually transferred
to the internal DMZ.
If you filled 0 in this field, it means that the
real connected port is the same as the
translated destination port.
Table 7-3 Add a Virtual Server rule
ADVANCED SETTINGS > NAT > Virtual Servers
65
Chapter 7
1 ~65534 44444
Enabled /
Enabled
Disabled
LAN / DMZ
DMZ1
regions
IPv4 format 10.1.1.5
0 ~ 65534 21
NAT