Planet MH-5000 User Manual page 163

MH-5000 User Manual
FIELD
Enable Bandwidth
Management
BUTTON
Reset Bandwidth
Management
Apply
Reset
Step 2. Setup the Actions Link
Select ANY to LAN1 to setup traffic that will be
transmitted by the LAN1 interface. Enter the
LAN1 interface bandwidth
(100Mbps). Click the Apply button to enforce the
LAN1 link bandwidth to be specified bandwidth. In
the table, the root class represents the whole
bandwidth of the link. By default the link is
partitioned into two classes: control class
(ctl_class) and default class (def_class).
The control class reserves bandwidth for control
protocols such as ICMP, TCP ACKs. The default
class is the default action of non-matched
packets. The default class can be recursively
partitioned into more classes. The classes are
organized as a tree. Click Create Sub-Class to
partition the default class.
FIELD
Edit __ to __ classes
LAN1 Interface
Bandwidth __ kbps
BUTTON
Prev. Page
Next Page
Create-Sub-class
Edit
Delete
DESCRIPTION
Enable Bandwidth Management feature of MH-5000
DESCRIPTION
Reset all the bandwidth management rules to default status.
Apply the settings which have been configured.
Clean the filled data and restore the original one.
Table 22-3 Setup status page of Bandwidth Management
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions
as
100000kbps
DESCRIPTION
Select the direction of action which you are
going to configure one.
Fill the real bandwidth which is located in
the upper direction.
DESCRIPTION
If there are more than one action pages, you can press Prev. Page to back to the previous
page.
If there are more than one action pages, you can press Next Page to go to the next page.
Create a sub class from the indicated class.
Edit the properties of the existent class.
Delete the indicated class.
Table 22-4 Setup edit actions page of Bandwidth Management
Range/Format
ANY to
WAN/LAN/DMZ
10 to 100000 kbps
161
Bandwidth Management
Range/Format EXAMPLE
Enable/Disable
EXAMPLE
Edit ANY to LAN1
classes
100000 kbps
Chapter 22
Enabled