Table of Contents
Advertisement
MH-5000 User Manual
Step 7.
Customize the Firewall rule
Check the Activate this rule. Enter the
Rule Name as AllowVPN, Source IP as
WAN1_VPNA (192.168.88.0), and Dest. IP
as LAN1_VPNA (192.168.40.0). Click Apply
to store this rule.
Step 8.
View the result
Here we have a new rule before the default
firewall rule. This rule will allow packets from
192.168.88.0 / 255.255.255.0 pass through
MH-5000. And accomplish the VPN tunnel
establishment.
At WALL-2:
Second, we will use the Manual-Key way to install the IPSec properties of WALL-1.
Step 1.
Enable IPSec
Check the Enable IPSec checkbox and click
Apply.
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > VPN Settings > IPSec
111
Chapter 13
Virtual Private Network – IPSec
Advertisement
Table of Contents
