Planet MH-5000 User Manual page 202

MH-5000 User Manual
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
VPN V1
V2
Setup TELNET Server
Setup SSH Server
Setup WWW Server
Setup HTTPS Server
Setup SNMP Server
MISC Setup
Enable/Disable SNMP
Configure SNMP server
File System Full
Update remote
management settings.
Set Gateway
Set DNS IP Address
Syslog Reload
Enable/Disable Ipmon
System Checksum Update
Disable Multicast
Update Multicast
Update WAN NAT settings
Update WAN NAT settings
Disable WAN NAT feature
Update pass-through
settings
Deactivated IPSec
Activated IPSec
Table D-1 All the System Log descriptions
SYSTEM: [S28] Enable SNMP by admin
(192.168.17.104:443)
SYSTEM: [S28] System Location: Building-A.
SYSTEM: [S28] Contact Info: +886-2-28826262.
SYSTEM: [S28] Disable SNMP.
SYSTEM: [S31] Update remote management TELNET Server
settings by admin (192.168.17.102:443).
SYSTEM: [S32] WAN1: Gateway IP: 192.167.17.254
SYSTEM: [S32] WAN1: Got PPPoE Gateway IP
210.58.28.91.
SYSTEM: [S33] WAN1: Clear DNS IP Address.
SYSTEM: [S33] WAN1: DNS IP Address: 168.95.1.1.
SYSTEM: [S33] WAN1: Get DNS Automatically.
SYSTEM: [S34] Syslogd stop.
SYSTEM: [S34] Syslogd start.
SYSTEM: [S34] Syslogd restart.
SYSTEM: [S35] Enable Ipmon.
SYSTEM: [S35] Disable Ipmon.
SYSTEM: [S37] Disable Multicast on interface WAN1
SYSTEM: [S37] Update Multicast on interface WAN1 to xxx
SYSTEM: [S37] Update Multicast on interface WAN1 to xxx
SYSTEM: [S38] Update WAN NAT settings to FULL feature
SYSTEM: [S38] Update WAN NAT settings to Basic operation
SYSTEM: [S38] Disable WAN NAT feature
VPN: [V1] Update pass-through settings
VPN: [V2] Deactivated IPSec
200
Appendix C
System Log Syntax