Planet MH-5000 User Manual page 121

MH-5000 User Manual
Step 8. View the result
Here we have a new rule before the default
firewall rule. This rule will allow packets from
192.168.88.0 / 255.255.255.0 pass through
MH-5000. And accomplish the VPN tunnel
establishment.
At WALL-2:
Here we will install the IPSec properties of WALL-2. Note that the "Local Address" and "Remote address" field are
opposite to the WALL-1, and so are "My IP Address" and "Peer's IP Address" field.
Step 1. Enable IPSec
Check the Enable IPSec checkbox and click
Apply.
Step 2. Add an IKE rule
Click the IKE hyperlink and click Add to add a
new IPSec VPN tunnel endpoint.
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > VPN Settings > IPSec
ADVANCED SETTINGS > VPN Settings > IPSec > IKE
119
Virtual Private Network –Dynamic IPSec
Chapter 14