Table of Contents
Advertisement
MH-5000 User Manual
Step 3.
Partition into Classes
Create a sub-class named LAN_1-to-LAN_2
from the default class. Enter 40% in the
bandwidth field, uncheck the Borrow button, and
click Apply. Select the default class and click the
Create Sub-Class to create another sub-class
named E-Commerce from the default class. Enter
20% in the bandwidth field, check the Borrow
button and click Apply. Now there are two
actions under the default action. They are
separately LAN_1-to-LAN_2 and E-Commerce
class as the right diagram.
Step 4.
Setup LAN1-to-WAN1 Rules
Select LAN1 to WAN1 to display the rules. There
is a pre-defined rule that matches all traffic into
the default class. Click Insert to insert a rule
before the default rule.
Step 5.
Customize the Rules
Enter a rule name such as outVPN, select the
defined Source IP as LAN1_outVPN and Dest.
IP as WAN1_outVPN. Select the action to be
LAN_1-to-LAN_2. In this way, all outbound
packets to the LAN_2 area will be put into the
LAN_1-to-LAN_2 queue and scheduled out at
617 kbps bandwidth. Click Apply to store the
changes.
Repeat
the
same
outE-Commerce rule.
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions > Create
Sub-Class
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
procedure
for
the
166
Chapter 22
Bandwidth Management
Advertisement
Table of Contents
