Table of Contents
Advertisement
MH-5000 User Manual
4. DHCP Relay: Activate the DHCP relay mode of MH-5000 so that the MH-5000 will become the relay agent and
relay the DHCP broadcast to the configured DHCP server. As the following Figure 4-3 described, WALL-1
redirects the DHCP request from the preconfigured port (LAN1) to the real DHCP server (10.1.1.4). Besides, in
this diagram, we can find that the PC of DMZ region communicated with the DHCP server directly.
5. As the following Figure 4-4 demonstrated, there is an embedded snmp agent in the MH-5000. So you can use
SNMP manager to monitor the MH-5000 system status, network status ,etc. from either LAN or internet.
Figure 4-3 DHCP Relay mechanism chart
39
Chapter 4
System Tools
Advertisement
Table of Contents
