Table of Contents
Advertisement
MH-5000 User Manual
Step 17. Insert a new service object
Enter the Service name. Select which protocol
type (TCP, UDP, ICMP) used by this service.
Specify a Source and Destination Port number
range for the service. If this service uses single
port, enter the number in the first blank. If the
service has more than one port range, select add
to specify additional protocols and port range.
Select Apply to add a new service object.
Note that service name should be an
alphanumeric value (including dash '-' and
underscore '_'), can start with a letter only
and, please note, it is case-sensitive!
Spaces and other special characters are not
allowed.
FIELD
Service name
Protocol Type
Configure Source
Port?
Port type
Port number
Configure Destination
port
Step 18. Add a service group
You can create groups of services to make it
easier to add rules. A service group can contain
predefined services and custom services in any
combination. You cannot add service groups to
another service group.
Click Groups hyperlink, and then click Insert to
add a new service group. Enter a Group Name to
identify the group. Select the services from the
available services list and click right arrow to copy
them to the Members list. If you would like to
remove the services from the members list, just
select the services and then click left arrow to
remove them.
BASIC SETUP > Books > Service > Insert
DESCRIPTION
The name of the service object.
The protocol type of the service object.
Configure the source port if yes.
The service port type.
The service port number.
Configure the destination port if any.
Table 9-5 The field of the Service objects
BASIC SETUP > Books > Service > Groups > Insert
80
IP/Services grouping
Range / Format
EXAMPLE
text string
TCP/UDP/ICMP
Enable/Disable
Single/Range
text sting
Enable/Disable
Chapter 9
L2TP
TCP
Enable
Single
1701
N/A
Advertisement
Table of Contents
