Table of Contents
Advertisement
MH-5000 User Manual
Step 3.
Customize the rule
Check the Active checkbox. Enter a name for
this rule like IKErule. Enter the Local IP
(192.168.88.0/255.255.255.0)
Address
and
the
Remote
(192.168.40.0/255.255.255.0). Select the
Outgoing interface of this Multi-Homing
Security Gateway. Enter the public IP of the
opposite-side VPN gateway (61.2.1.1) in the
Peer's IP Address. Click the ESP Algorithm
and select Encrypt and Authenticate (DES,
Enter
the
MD5).
Pre-Shared
1234567890. Click the Apply button to store the
settings. Note, in the Action region, you should
choose either ESP Algorithm or AH Algorithm, or
system will show error message.
Step 4.
Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
IP
Address
Self local IP
Address
as
Key
The opposite
side IP
Address
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
106
Chapter 13
Virtual Private Network – IPSec
Advertisement
Table of Contents
