Table of Contents
Advertisement
MH-5000 User Manual
Pre-Shared Key
Step 4.
Detail settings of IPSec IKE
In this page, we will set the detailed value of IKE
parameter. Fill in the related field as
indicated to finish these settings.
FIELD
Transport Layer
Condition
Protocol
Enable Replay
Action
Detection
Negotiation
Mode
Pre-Shared Key
The key which is pre-shared with remote
side.
Table 13-4 Related field explanation of adding an IPSec policy rule
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add >
Advanced
Table 13-5
DESCRIPTION
Utilize this field to select some packets which
are specified protocol (ANY, TCP, UDP). If
the packets are not the specified protocol will
not be allowed to pass through IPSec tunnels.
Whether is the "Replay Detection" enabled?
View only, it is set previously and can not be
edited again.
View only, it is set previously and can not be
edited again.
ANY / TCP / UDP
NO / YES
Phase1
Can not be edited
Can not be edited
102
Virtual Private Network – IPSec
text string
1234567890
Range / Format
1234567890
Chapter 13
EXAMPLE
TCP
NO
Main
Advertisement
Table of Contents
