Table of Contents
Advertisement
MH-5000 User Manual
Step 4.
Customize NAT Rules
In the full-feature mode, the rules can be further
customized. Incoming packets from LAN/DMZ
zones are top-down matched by the NAT rules.
Namely, NAT implements first match. Select the
rule item that you want to do with: insert a new
rule before it; delete it; move it before the
list-box chosen item.
Step 5.
Insert NAT Rule
Step 5.a —
Insert an Many-to-One
Rule
As described in the above, Many-to-One NAT is
the default NAT rule type in the Basic mode. If
you have other alias LAN/DMZ subnets, you can
manually add a Many-to-One NAT rule for them.
First select the Type as Many-to-One, check the
Activate this rule, enter a Rule name for
this rule, enter the private-IP subnet (an IP
address with a netmask) to be translated, and
enter the public IP address for being translated
into. You can check the Auto choose IP from
WAN ports. The MH-5000 will automatically
determine which WAN IP is to be translated into.
Activate this rule
Status
Rule name
Source IP /
Condition
Netmask
Action
Translated Src
IP (Auto choose
IP from WAN
Netmask
ADVANCED SETTINGS > NAT > NAT Rules
ADVANCED SETTINGS > NAT > NAT Rules > Insert
FIELD
The NAT rule is enabled or not
The NAT rule name
Compared with the incoming packets,
whether Source IP/Netmask is matched or
not.
Determine what NAT method you are using
in the specified NAT rule.
Type
Refer more information in the section 7.5.
Only work in Many-to-One type, the public
IP address will be assigned by the default
wan link.
ports)
Space /
When NAT type is not Many-to-One, we
must specify IP address / Netmask directly.
DESCRIPTION
61
Range / Format
EXAMPLE
Enabled /
Disabled
text string
(Max: 200 entries)
192.168.40.0 /
IPv4 format
255.255.255.0
Many-to-One /
Many-to-Many /
Many-to-One
One-to-One /
One-to-One
(bidirectional)
Enabled /
Disabled
IPv4 format
Chapter 7
NAT
Enabled
Rule
Enabled
N/A
Advertisement
Table of Contents
