Planet MH-5000 User Manual page 75

MH-5000 User Manual
Activate this rule
Status
Rule name
Incoming
packets from
Source IP &
Netmask
Dest IP &
Netmask
Service
Configure src.
port? Type Src.
port
Condition
Type
Src. Port
Configure dest.
port? Type Dest.
port
Type
Dest. Port
Forward to
Action
Nexthop
gateway IP
FIELD
The policy routing rule is enabled or not.
The policy routing rule name.
Packets comes from which interface
Verify if the incoming packets belong to the
range of the Source IP/Netmask in the policy
routing rule.
Verify if the incoming packets belong to the
range of the Dest IP/Netmask in the policy
routing rule.
Verify what is the service of this packet?
If the service is TCP or UDP, we can choose
to configure or not to configure source port.
If we decide to configure source port, we
must choose the port to be single or range.
If we select single at above field, we just
have to fill a port in the first blank space. If
we select range at above field, we need to
fill the range of the ports.
If the service is TCP or UDP, we can choose
to configure or not to configure destination
port.
If we decide to configure destination port, we
must choose the port to be single or range.
If we select single at above field, we just
have to fill a port in the first blank space. If
we select range at above field, we need to
fill the range of the ports.
If the packet is matched to this rule, which
interface does this packet sent out to?
The next gateway IP address of forwarding
interface.
Table 8-2 Add a policy routing entry
DESCRIPTION
73
Range / Format EXAMPLE
Enabled /
Enabled
Disabled
text string
GenlManaRoo
(Max: 200
entries)
LAN / DMZ
regions
192.168.40.192
IPv4 format /
IPv4 format 255.255.255.19
IPv4 format / 0.0.0.0 /
IPv4 format 0.0.0.0
ANY / TCP /
UDP / ICMP
Enabled /
Disabled
Single / Range
1 ~ 65534
Enabled /
Disabled
Single / Range
1 ~ 65534
WAN interfaces WAN1
IPv4 format 210.2.1.6
Chapter 8
Routing
m
LAN1
/
2
Any
No
N/A
N/A
No
N/A
N/A