Planet MH-5000 User Manual page 87

MH-5000 User Manual
Step 3. Customize the rule
Check the Activate this rule checkbox.
Enter the rule name as PC1_1, and enter the IP
of
address PC1_1
255.255.255.255). Select Block and Log to
block and log the matched traffic. Click the Apply
to apply the changes.
Rule name
Status
Schedule
Source IP
Condition
Dest IP
Service
Forward / Block
the matched
session
do not log / log
the matched
Action
session
Forward
bandwidth class
Reverse
bandwidth class
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
(192.168.40.1
/
FIELD
The name of the Firewall rule.
Note that rule name should begin with
alphabet, followed by alphabet/digits/dashes.
When does this firewall rule take effect?
Compared
whether Source IP is matched or not.
Compared
whether Dest IP is matched or not.
Verified the service of incoming packet is
belong to each TCP、UDP、ICMP.
If packet is matched the rule condition,
Forward or Block this matched packet?
If packet is matched the rule condition, Log or
Don't log this matched packet?
About this field description, please refer Table 22-6 Add a new
Bandwidth Management rule for more information.
The same as above field.
Table 10-2 Insert a Firewall rule
DESCRIPTION
with the incoming
with the incoming
85
Range / Format
text string
All the defined
schedule objects
and groups
All the defined
packets,
address objects
and groups
All the defined
packets,
address objects
and groups
All the defined
service objects
and groups
Forward / Block
log / do not log
Chapter 10
Firewall
EXAMPLE
PC1_1
Always
PC1_1
WAN1_ALL
ANY
Block
log
def_class
def_class