Planet MH-5000 User Manual page 120

MH-5000 User Manual
Step 5. Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
Step 6. Add a Firewall rule
Beforehand, please make sure that the Firewall is
enabled. Select WAN1-to-LAN1 to display the rules
of this direction. The default action of this
direction is Block with Logs. We have to allow
the VPN traffic from the WAN1 side to enter our
LAN1 side. So we click the Insert button to add
a Firewall rule before the default rule.
Step 7. Customize the Firewall rule
Check the Activate this rule. Enter the
Rule Name as AllowVPN, Source IP as
WAN1_VPNA (192.168.88.0), and Dest. IP
as LAN1_VPNA (192.168.40.0). Click Apply
to store this rule.
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
ADVANCED SETTINGS > Firewall > Edit Rules
ADVANCED SETTINGS > Firewall > Edit Rules > Insert
118
Virtual Private Network –Dynamic IPSec
Chapter 14