Table of Contents
Advertisement
MH-5000 User Manual
Step 3.
Setup Time/Date
Select the Time Zone where you are located.
Enter the nearest NTP time server in the NTP
time server address. Note that your DNS
must be set if the entered address requires
domain name lookup. You can also enter an IP
address instead. Check the Continuously
(every 3 min) update system clock and
click Apply. The MH-5000 will immediately
update the system time and will periodically
update it. Check the Update system clock
using the time server at boot time and
click Apply if you want to update the clock at
each boot. If you want to manually change the
system
time,
uncheck
(every 3 min) update system clock and
proceed by entering the target date.
FIELD
Time zone
NTP time server address
Continuously (every 3
min) update system
clock
Update system clock
using the time server at
boot time
Manual Time Setup
Step 4.
Setup Timeout
Select the target timeout (e.g. 30 min) from the
System Auto Timeout Lifetime. Click the
Apply button. Now the browser will not timeout
for the following 10 minutes after your last
touching of it.
FIELD
System Auto Timeout
Lifetime
SYSTEM TOOLS > Admin Settings > Time/Date
the
Continuously
the time zone of your area
Use NTP time server to auto update date/time value
System will update system date/time value every 3 minutes to NTP
time sever.
System will update system date/time value to the NTP time server
at boot time.
Manual setting Time & Date value.
Table 4-3 System Tools – Time Data menu
SYSTEM TOOLS > Admin Settings > Timeout
When system is idle for a specified time, system will force the
people who logins into the system will logout automatically.
Table 4-4 System Tools – Timeout menu
DESCRIPTION
DESCRIPTION
42
Chapter 4
System Tools
EXAMPLE
N/A
tock.usno.navy.mil
Enabled
disabled
N/A
EXAMPLE
30
Advertisement
Table of Contents
