Registering The Remote Printer - Xerox 6030 User Manual

Registering the Remote Printer

For printing using the lpr command, not only host system registration but also remote
printer registration on the client workstation is necessary.
Registration information depends on the system, but logical device names on the
workstation must correspond with logical printers on the 6030/6050 Wide Format printer
system.
SunOS 5.X
For SunOS 5.X, register the remote printer using the lpadmin command.
•
Executing the lpadmin command
In the example below, the 6030/6050 Wide Format printer system with the host name
[
oklahoma
If the printer devices plt00h, plt01h, and plt02h are specified, they are sent to the logical
printers PLT00H, PLT01H, and PLT02H of
#lpadmin -p plt00h -s oklahoma!PLT00H
#lpadmin -p plt01h -s oklahoma!PLT01H
#lpadmin -p plt02h -s oklahoma!PLT02H
In this example, the printer devices plt00h, plt01h, and plt02h are created new and set.
The Xerox 6030/6050 Wide Format printer system has 100 logical printers for each
supported data format. Therefore, 100 entries can also be set using the lpadmin
command.
174
Chapter 6 Ethernet Print Service (for UNIX)
Refer to the "Main Printing Functions" (page 16) section in "2.1 Outline of 6030/6050
Wide Format Print Service" for logical printers.
You need to have the root user privileges to use the lpadmin command.
For details of the lpadmin command, see SunOS 5.X User Guide.
]
is registered.
\
If csh is used, enter " !" instead of "!" in the above prevent that the character "!"
and the subsequent characters should not be replaced by the command log.
You can register the remote printer using the admintool prepared by SunOS.
To register the remote printer, select the menu [Printer Manager] > [Edit] > [Add
Printer] > [Add Access to Remote Printer]. Specify a logical printer name PLT00H in
Printer Name, a host name 6050 WF in Printer Server and BSD in Print Server OS.
[
oklahoma].