Xerox 6030 User Manual page 230

206
Chapter 8 Replacing Paper
There is an area at the front of the tray on which
the roll paper can be placed.
4
While pulling the lever situated in the end of the
roll paper shaft, align the roll paper with the
paper size marks on the shaft and set the roll in
place.
5
Align the roll paper in accordance with the
directions displayed inside the media tray and
load the roll onto the shaft guide.
Cut the leading edge of the paper before
setting it in place if it is damaged. Refer
to "Chapter 7 Leading Edge Cutting
Methods" for details on how to do this.
6
Rotate the roll paper until the leading edge is
gripped in the roller.
Rotate the knob until the leading edge of
the paper can be seen in the window.