Other Subcommands - Xerox 6030 User Manual

Other Subcommands

This section explains the ftp subcommands.
ascii: Sets transfer data to the ASCII format.
bin: Sets transfer data to the binary format.
bye: Terminates FTP processing.
cd: Change directory, will display logical printer.
dir: Displays directory, will display logical printers set from the control panel.
If nothing is specified in 6030/6050 Wide Format, only the logical printer at address
00 is displayed.
ls:
Displays directory, will display logical printers set from the console panel.
If nothing is specified in 6030/6050 Wide Format, only the logical printer at address
00 is displayed.
mput: Instructs specified two or more files to be transferred to 6030/6050 Wide Format
interactively. However, this transfer can be specified to an existing logical printer
only.
open: Connects the client workstation to 6030/6050 Wide Format.
put: Transfers a specified file to 6030/6050 Wide Format. However, this transfer can be
specified to an existing logical printer only.
pwd: Present working directory, displays the currently specified logical printer name.
send:
Transfers a specified file to 6030/6050 Wide Format. However, this transfer can be
specified to an existing logical printer only.
6.3 Printing Using the ftp Command
179